The vast majority of SCB14 dry-type transformers have a fixed transformer coil with primary and secondary magnet coils wound around the base. Due to the high conductivity of iron bands, the vast majority of the magnetic flux is confined to the transformer coil, so the two sets of magnet coils can obtain a very high-quality magnetic coupling.

SCB14 dry-type transformer has the characteristics of high reliability and long service life. According to the different application ecological environment, the shell with different waterproof level can be configured or the chassis can not be configured. It can be used as an alternative to oil-transformer transformers, which can be used in multi-storey buildings, shopping malls, airports, tunnel construction, pharmaceutical companies, ships and other core or unusual ecological sites.

The core material of SCB14 dry-type transformer is made of high-quality cold-rolled non-tending silicon steel sheet, the built-in structure of the full oblique connection, the low-voltage magnet coil is a foil rotor winding structure, the heat-resistant cast iron foil is winding, the high-voltage ignition wire is a layered structure, and the epoxy glue of the mechanical pump is cast into shape.

Our manufacturers explain the characteristics of SCB14 dry-type transformer in detail:

1. Safety performance, not easy to ignite, fire safety can be immediately installed in the load management office;

2. Maintenance-free, simple installation, low operation and cost;

3. Good moisture resistance, everything can operate normally from relative humidity;

4. Low consumption, low noise, small increase in local volume, consumption is generally 5%~10% lower than the relative standard;

5. Good heat dissipation, strong load capacity, under the condition of air cooling, it can be overloaded by 50%;

6. Reliable operation, perfect over-temperature protection control system, which can ensure the safe operation of the transformer;

7. Small size, light net weight, stable structure, strong ability to resist sudden short circuit faults.

SCB14 dry-type transformer is generally poor welding quality, there are empty welding, open welding, welding on the needle eye, sand holes and other problems, the original transformer of the power installation project is more likely to have welding powder and paint to cover, after the operation of the potential safety hazards will be exposed, in addition to the induction coil vibration will make the welding crack, resulting in leakage.