SCB13-1000KVA power transformer is our company under the premise of the original SCB11 dry test transformer, according to the exploration and application of new materials, new processes and the combination of independent innovation and technology introduction, with low no-load loss, low no-load current, low noise and other characteristics, high and low voltage coils are poured under vacuum and pressure, so that the resin insulation not only has full wrapping, but also has inter-turn immersion, the pouring body has flame retardant, will not explode and release harmful gases, will not cause harm to the environment, other equipment and human bodyIt is not sensitive to humidity, dust and pollution, and has no partial discharge operation, and is suitable for key or special environmental sites such as multi-storey buildings, commercial centers, airports, tunnels, chemical plants, ships, etc., and can also customize the required transformers according to customer needs.

The SCB13-1000KVA power transformer produced by our factory can be used as an upgraded product of oil-immersed distribution transformer, and is a commodity with the best characteristics in various dry-test transformers. Because of advanced design, high-quality materials, scientific formula, strict process and high standard inspection, the product has the following characteristics:

1. Copper wire for high-voltage winding, copper wire or copper pober winding for low-voltage winding, glass fiber felt is filled and wrapped, and epoxy resin without filler is poured under vacuum state, which produces a solid cylindrical overall after curing, with high impact toughness, small partial discharge and high reliability.

2. Flame retardant, explosion-proof, no pollution to the environment. The glass fiber and other insulating materials of the coiled coil have the characteristics of self-extinguishing, which will not cause electrical isolation due to short circuit, and the resin will not cause toxic and harmful gases under high fever.

3. The coil is not damp, and the core clamp has a special corrosion-resistant protective layer, which can operate in 100% relative humidity and other extreme environments. Intermittent operation does not have to be solved by dampness.

4. High level of anti-short circuit and lightning impact.

5. The resin layer on the inner and outer sides of the coil is thin and has good heat dissipation performance. The cooling method generally adopts gas natural cooling. For transformers of any degree of protection, they can be equipped with an air-cooled system to increase the short-term overload capacity and ensure full operation.

6. Small size, light weight, less floor space, low installation cost, no need to consider the drain tank, fire protection equipment and backup power supply.

7. Low consumption, good power-saving effect, economical operation, maintenance-free.

8. Because there is no risk of fire extinguishing, it can be dispersed and installed in the load center, and it is close to the fire point sufficiently, so as to reduce the cost of the line and save the cost of expensive low-voltage equipment.

SCB13-1000KVA power transformer can be used as an upgrade product of oil-immersed distribution transformer, and is a commodity with the best characteristics in various dry-test transformers, especially suitable for key sites such as urban power grids, multi-storey buildings, commercial centers, theaters, hotels, tunnels, subways, underground power stations, laboratories, stations, ports, airports, and combined distribution stations.