For the basic knowledge of S11-M-50/10/0.4 transformer (oil-immersed) oil, we should master, today we introduce to you one of the common measurement methods of S11-M-50/10/0.4 transformer (oil-immersed) oil pH test, you can use the pH tester to measure, the common steps are as follows:

1. After each use, the extraction solution and the neutralizing hydraulic plate must be loosened to prevent the infusion hose from being squeezed, deformed and adhered for a long time, which will affect the use.

2. After each use, the neutralization solution and extraction liquid pipelines must be rinsed with absolute ethanol to prevent sediment blockage.

3. If the middle section of the infusion hose is used for a long time, if it is found to be obviously deformed or adhered to, it should be replaced. When replacing the hose, remove the hose from the groove of the pump along with the brass connector, replace it with a new hose, and put it back in its original condition.

4. Replace the reagent: When the old reagent is exhausted, unscrew the old reagent bottle and replace it with a new reagent bottle.

5. Replace the print ribbon:

The above steps should be mastered, generally S11-M-50/10/0.4 transformer (oil-immersed) oil is acidic, if it is neutral and alkaline, it is false, especially the PH value is between 4-6 is relatively qualified, as long as it is not within this range is fake, we don’t have to buy it anymore!